Obtain building data for
ESG reporting
Sustainability is right at the top of the political agenda. The EU is constantly expanding its ESG regulations to ensure transparency and progress in the areas of environmental, social and corporate governance.
Sustainability efforts are nothing new in the real estate industry, but this kind of pressure to act was previously unheard of. Starting from the financial sector, asset managers are under pressure to take concrete steps now despite numerous uncertainties.
In addition to mandatory reporting, ESG measures promise to increase value and reduce risk: future environmental standards are easier to comply with, CO2 pricing can be reflected financially, sustainable tenants pay higher prices and ensure lower vacancy rates.
But the basis for this is often missing, especially in the real estate portfolio: DATA! LineMetrics makes it possible to easily record sensor data in the inventory and thus implement ESG initiatives more efficiently.
Challenges
- ESG regulations are becoming increasingly important and are constantly evolving
- Data basis for optimization and reporting is missing, especially in existing buildings
- Manual data collection is extremely inefficient
- Real estate value and rental income are increasingly influenced by ESG criteria
Automated recording of ESG-relevant sensor data
Plug & play solution for recording any sensor data, existing systems can continue to be used.
Sensor data in existing systems
Enrich reporting tools, energy management, ERP, CAFM & Co with the measurement data
ESG-relevant data available at the touch of a button
Automatically and seamlessly record and evaluate measured values and transfer them to any existing system.
Make better decisions, optimize sustainably
Data-based analysis and optimization. Document success and savings automatically.
All sensor data with an all-in-one system
Measurement technology, data transmission, evaluation, data storage and much more in one system. Only one contact person for all questions.
Retrofitting existing properties wirelessly
Wireless sensors and gateways with SIM cards make cables and IT superfluous. Roll-out via plug & play by employees on site.
Record and optimize electricity consumption
Consumption data and therefore costs are often only available as total values for longer periods, for example in the course of billing the energy supplier. This means that it is not possible to read current values and trends, to monitor the success of optimization measures or to show individual areas, departments or tenants separately or to allocate consumption to those responsible.
With LineMetrics, new measuring points can be established at any point. The consumption data and numerous other parameters are recorded continuously and in fine granularity by MID-compliant measuring devices and transmitted wirelessly to the LineMetrics Cloud.
Read existing gas/water/electricity meters
The manual reading of gas, water and electricity meters is very labor-intensive and can therefore only be carried out selectively. Only a few data points are therefore available. Current consumption values are completely missing or have to be estimated. Recognizing trends, identifying potential savings and benchmarking is therefore de facto impossible. Replacing them with modern smart meters would be too costly and would therefore only take place very slowly.
With LineMetrics, it is possible to automatically read around 90% of the most diverse existing meters. Measured values that were previously not read out at all or only at long intervals become available at 15-minute intervals. This data opens up new insights, enables up-to-date reporting at the touch of a button and forms the basis for optimization.
Optimize heating, cooling and ventilation
HVAC systems are by far the largest energy consumers in buildings and are responsible for massive CO2 emissions. These systems are often set up once and operated on this basis for years or even decades – regardless of the climate, room usage, conversions or employee preferences. This can not only have a negative impact on the productivity and well-being of employees, but can also mean that a lot of energy is wasted.
LineMetrics creates multiple levels of transparency here: the continuous recording of the room climate, the utilization of areas and HVAC parameters enables comprehensive insights, analysis and optimization options. This allows each room to be heated, ventilated or cooled on the basis of current values and actual usage behavior.
Significantly reduce the risk of infection
Aerosols (airborne particles) can be contaminated with viruses and pose a risk of infection (e.g. Covid-19). The German Federal Environment Agency confirms that CO2 sensors can significantly reduce this transmission risk. They sound the alarm at critical values and enable targeted ventilation. Humidity (ideal: 40 to 60%) also plays a key role: it reduces the survival time of viruses and the time they remain in suspension. It also supports the mucous membranes in the defense against viruses.
LineMetrics enables simple and continuous monitoring of the indoor climate at any point in the building. This lays the foundation for targeted measures and monitoring their success. In addition, the improved working environment can be demonstrated to tenants, which enables corresponding rental agreements and higher income.
Reduce the risk of legionella
Legionella can be very dangerous and sometimes even fatal, especially for people with a weakened immune system. The pathogens multiply particularly in lukewarm water in pipes. If this contaminated water is then used without sufficient heating, there is a health risk. ESG-relevant risks are the result: liabilities, restructuring work, loss of income, loss of image and value.
Previously, flow/return temperatures had to be checked on site. Temperature sensors directly on the pipes enable seamless monitoring and better adjustment of the systems. The LoRa radio also penetrates thick cellar walls and enables reliable alarms for critical values or, in the case of liability issues, proof that all requirements have been met.
Contain leaks and building damage
Leaks in water pipes often remain undetected for a long time. Enormous damage, the waste of valuable resources and the risk of mold with the associated health hazards are the result. Other liquids that are necessary for building operation can also be monitored: Diesel tanks for emergency power generators, cooling liquids, various storage tanks, etc.
Leakage sensors, which can be positioned anywhere and in hard-to-reach places, provide early warning of problems. Flow meters with anomaly detection (artificial intelligence) can achieve similar results. Real-time alerts enable immediate action to be taken and can thus massively reduce environmental risks.
Making real estate portfolios “ESG-ready” with sensor data
Plug & Play solution
Quite simply: cables, networks and IT projects are not necessary.
Fast roll-out
Retrofit properties quickly and efficiently wirelessly.
Retrofitting across Europe
Easily upgrade real estate portfolios – no matter where.
50+ use cases
A system with a wide range of ESG-relevant measurement data.
Extreme radio range
LoRa radio can cover entire buildings – right down to the basement.
Maintenance-free operation
LineMetrics ensures that operations run smoothly.
API for data integration
Integrate all measured values into any existing system.
Scale at any time
Start simply, expand flexibly with new use cases/locations.